Showing posts with label WS-X6716-10G-3C. Show all posts

Idea Cleared – Hubs, Switches and Routers

No Comments »



In the world of network communication, we often confuse between hubs, switches and routers. Fact is they all seem the same to a layman but are very much different in their internal structure and their working. To clear the air of confusion and also to have a good idea of what they are let us get a look:

The Definition

Hub – this is simply an electronic device that is used to connect devices together in a network. In a LAN there are different segments and a hub connects them all together. The hub receives a data packet from a source and forwards it to all the other ports that it is connected to.

Switch – this is like a hub but it has intelligence as it can filter the data packets that it receives and forwards them to only the required destinations. A switch generally operates in the Data Link Layer of the OSI model but also operates in the Network Layer. Those which operate in the Network Layer are called as Layer 3 switches.

Router – while switches and hubs are present inside a network, a router is present outside a network called a gateway. Actually it is used to connect between networks and so at least two networks are needed to set up a router. Routers are very intelligent as they follow an algorithm to send data packets using headers, forwarding tables and protocols and send them through the best path that is available.

The Difference

The difference between a hub, a switch and a router lies in the way data is carried in the form of frames.

Hub – the hub receives the frame from a source and transmits it to all the other ports. As a result it creates a lot of traffic unnecessarily and the bandwidth is eaten up. Also, since a hub shares the bandwidth with all the other computers there will be a reduction in speed and performance. There may occur a situation when many computers start sending data packets to one another and there is a collision in between the data packets.

Switch – a switch works in the way that it keeps a record of the addresses of the computers that it is connected to. This helps it to identify the computer that the data frame is intended for. The frame has the address of the destination computer and the switch sends the data to it. As a result there is no collision or delay in delivery. Also, a switch can fully allocate the bandwidth to each of the ports that it is connected to. Even different ports can send data to one another without creating any form of collisions.

Router – a router is totally different from a hub or a switch in that it is used for inter-networking. It uses the IP addresses and connects the best ways to make a link between the sender and the receiver. All routers consist of WAN port connecting to a DSL or cable modem.

These are generally the differences between a hub, a switch or a router. For switching solutions one should consider the sup 720 10g Cisco 10gigabit Ethernet or the WS-X6716-10G-3C.

Catalyst 6500 Series FAQs

No Comments »


For connectivity options there are few that can match the quality of the WS-X6716-10G-3C which belongs to the 6500 series. To know about this series let us take a look at the questions that might arise and try to get the answers as much as possible:

1. What are the newer features present in this series?  

  • The port density is doubled and there is now support for 132 10 Gigabit Ethernet ports/chassis 
  • It does not use much power and in fact uses only half the power per port on being compared to the 8 port 10 Gigabit modules. 
  • It has the ability to operate in both the performance or oversubscription mode. 
  • Makes high availability of network on being used with the E series chassis. 

2. How does the system perform regarding multicast replication? 

This system provides great multicast replication performance in audio and video conferencing. This is because per replication engine it gives 50 G of bandwidth.

3. Can this model support both ingress and egress replications? 

Yes, this model can support both the replications. The fan-out time is greatly increased by egress replication mode.

4. How does power consumption fare for this series? 

The 6500 series has advanced technology which enables it to use half the power than the previous serious of 8 port 10 Gigabit module. In absolute terms, this series consumes 28.6 watts per port.

 5. What is the function of the Distributed Forwarding Card (DFC) with the module?

This module is attached with a 40 Gbps connection and for this high density module the DFC is present to maximize the switching performance. The DFC3C in this module supports the functions of the previous version and along with it Virtual Switch Link and 96k MAC entries.

6. What is the software support for this module? 

This 16 port 10 Gigabit Ethernet module has IOS software support of 12.2(33)SXH2 or above. Also, the IOS modularity and Native IOS are supported.

7. What are the problems of running this module in Virtual Switching System? 

For Virtual Switching System, the module will be supported with the version of IOS software 12.2(33)SXH2 or above only. The problem with 12.2(33)SXH1 is that the system will be powered down.

8. Is it possible to make a virtual switch link with this module?

 It is very much possible to make a virtual switch link with this module in performance mode. However, the ports cannot be used in oversubscribed mode.

These are more or less the FAQs that cross the mind of people intending to buy the WS-X6716-10G-3C. If however one wishes to seek another model, then he can go for the Cisco WS-C2960S-48TS-L.

FAQs about Sup 720 10g Cisco 10 gigabit Ethernet

1 Comment »


You have probably heard about sup 720 10g Cisco 10 gigabit Ethernet but are left wondering what this could be. Well, for the sake of starters, it is a virtual switching supervisor engine and is a very modern device. There are a lot of questions that can arise in the mind and hopefully we can be to clear them through this FAQ.

1. What is the Sup 720 10g Cisco 10 gigabit Ethernet?

It is basically a supervisor engine in the family of the 720 series and is fitted with two 10 Gigabit Ethernet uplinks.

2. What are the modes of operation of this product? 

This engine can work at two modes: the first one is the VSS 1440 mode which enables the Cisco VSS feature and the second mode is the non-VSS one. This product has the benefit of easily migrating from the standard Gigabit Ethernet to the more advanced 10 Gigabit Ethernet.

3. How can this be ordered? 

There are two ways of ordering – the first one is to order by the product ID codes and the second is to order as a part of a package using the product ID codes. The Cisco IOS® Software IP Base is included free with the bundled option.

4. Can the bundles be upgraded to support the Cisco software? 

Yes, the bundles can be upgraded by: 
  • Purchasing a redundant bundle within the bundle 
  • Purchasing a single Cisco software license 
5. Can these bundles support the Supervisor Engine 720 in VSS 1440 mode? 

Yes, it can support. People can operate it in VSS 1440 mode using the Cisco software.

6. Are the bundles specifically attached to the VSS 1440? 

Since, this is designed targeting the Layer 2 Access method so the answer is no.

7. What is included in these bundles? 

The things included are: 
  • a fan tray 
  • a single supervisor engine 
  • a chassis 
  • and the Cisco IOS software 
  • a redundant supervisor card, service modules, required line cards, power supply unit and WAN cards (all optional) 
8. Can IP services and above present inside the bundle be ordered? 

It can be ordered, but there has to be a second supervisor engine alongside the bundle.

9. Is there a possibility of upgrading a bundle configuration with IP services? 

Absolutely, there is every possibility of an upgrade.

10. What is the full form of VS at the start of the product ID? 

The full form of VS stands for Virtual Switching. This means that the supervisor engine has the potential to enable VSS 1440.

11. If one has the sup 720-3B/XL, can one upgrade it? 

There is every possibility of an upgrade.

A lot of the frequently asked questions have been attempted to be answered. The sup 720 10g Cisco 10 gigabit Ethernet is one of the top-most connectivity products along with CiscoWS-X6716-10G-3C Catalyst 6500 16-Port Ethernet Module.
For Trade Enquiries Please Contact Shopricom Executives At Your Convenience. Visit www.shopricom.com or Call 1-800-997-8008

Powered by Blogger.